Title

Home
Articles Search
lock set

Articles search results for lock set

Showing 1 to 20 of 65 articles

Suspension - Basic priorities for improved suspension performance. Having studied the 'Suspension - Terminology' article you should now have a ‘job description’ understanding of previously possibly un-comprehended words associated with suspension control. Now - what to do with it? The first thing we need to establish is an order of priority before distributing hard-earned 'beer vouchers' in all directions. Fortunately, this is a good deal less complicated than is generally believed. Despite the five main factors that control the front suspension geometry – kingpin inclination, caster angle, camber angle, track, and bump-steer – we are only really able to alter three of those easily. King-pin inclination is non-adjustable, as it’s a feature of where the swivel-pins are mounted on the hub at the factory. It will alter as other adjustments are made, but we can do nothing easily about correcting/optimising it independently, as these are fixed in position on the swivel hub.

CAM TIMING - Mechanical Method

CAM TIMING - Mechanical Method Part No Applications: MD256, MD266, MD276, MD286, MD286SP, MD296, MD296SP, MD310SP, MD530, MDM266/KIT, MDM276KIT, MDM286KIT Equipment required - Stop plate - mechanical stop plate for setting TDC (see text). Set of feeler blades Terminology - TDC - Top Dead Centre, when piston is at highest point in bore BTDC - Before Top Dead Centre, before piston reaches highest point in bore ATDC - After Top Dead Centre, after piston has reached highest point in bore Accurate piston position indication is the first goal. You need to know exactly when piston one is at TDC. Without engineering measuring equipment a ‘stop plate’ is required. This you will either have to manufacture personally, or get one made. You need a piece of metal plate long enough to span the bore plus a couple of the head stud holes on either side - about 4.750" long by 1.375" wide will do the trick.

As outlined in the 'Gearbox - standard production gearbox types' article, it is entirely possible to change the common 4-syncro gearboxes to the helical close-ratio set-up as used in the Cooper S, 1275GT, 1300GT, and some early MG Metros providing the right parts can be sourced. And you don't already un-knowingly have the close-ratio kit fitted! Part numbers are detailed at the end.

The other pre-requisite for this conversion is that it can only be applied to the early, pre-A+ type mainshaft gears. That's those that have the square-topped teeth as supposed to the distinctively pointed A+ profile. This is because despite being endowed with A+-type fittings for the mainshaft end and layshaft, the conversion gears have the pre-A+ tooth profile. This is not to say that the conversion cannot be put into an A+ gearbox casing - it can and is detailed in the relevant article.

What is essential to understand is that the pre-A+ second and third mainshaft gears are going to be

Brakes - How They Work

This time we’re going to look at just how brakes do what they do, and ways to improve them. Without a doubt the most important point to get sorted at the outset is just what makes brakes do their thing - FRICTION. The sole purpose of the brake set-up on any vehicle .....

What you actually need for the disc/drum conversion is pretty straightforward. Disconnect the steering arms, top and bottom swivel-pins, CV joint, and flexible brake pipes at the subframe - that’s it. There are, however, a number of ancillaries to consider.

Basics

Basics Fitting discs designed for the Mini is easy enough. Just make sure you use CV gaiters for the disc-brake set-up - these have a different bellows shape to stop the gaiter rubbing the inside of the hub. The drum type will rub, then split, shedding grease all over the place. Moly grease is mighty mucky stuff to deal with and doesn't assist braking at all! A tip for racers - to stop the gaiters over-expanding when getting very hot and imitating the aforementioned, put either a decent sized split pin or (my favorite) a piece of very small bore pipe - as in the type supplied with WD40 aerosols, etc. - under the retaining strap on the drive shaft. This allows air to escape and return,

Brakes - Fundamental Considerations

When looking to increase their cars performance, most folks immediately turn to considering higher engine power outputs. Because of this pre-occupation brakes tend to slide down the improvements priority list. However, they are far more important - being able to accelerate at warp speed to hyper-space in the twinkling of an eye is all very well, but disastrous if you can’t stop. You will make a very big hole in the scenery, and possibly end up wearing an wooden over-coat. Getting the braking system sorted out can help to make the car quicker, as you will be able to more confidently, therefore maximising speed in any given situation. Being one of those ‘sciences’ used in the automotive industry I hope to shed some light on the subject as it's another of those where many questions from confused and mislead folks that clog up my e-mail board. The advent of the Metro, and the brakes used on it has spawned a lot of activity in this direction. It was soon discovered that they could b

Brakes - Pads, Function and Parameters

The past few years have witnessed a great deal of activity in the brake-swapping department by Mini enthusiasts world wide. The reasons are quite diverse, ranging from fashion to necessity. Some fit vented Metro 4 pot brakes because it’s the ‘in’ thing to do, giving max pose value. Some believe it’s a performance improvement, usually misguided by a misinformed vendor hell bent on making a sale. Some do it because they’ve been given a Metro, and their Mini’s endowed with drum-brakes. Some fit 7.5” S-type brakes because they want to fit 10” wheels on their late-type Mini. Some fit them because the racing discipline they compete in won’t allow anything else. Some even fit the disastrous 7” Cooper-type because it’s all they have. Whatever the reason or type of disc-brake set-up used, the effectiveness of the installation can be honed to perfection by the type of brake pads fitted. Indeed, using the correct brake pad on a current set-up could out perform any intended swap, such is their in

Rocker gear - General compendium

Whether you’re building a solid road performer or fire-breathing monster, the main goal is to improve air/fuel flow into the engine. The more you can get in, the more power you can get out. Cheapest chunk of power improvement comes from sorting the asthmatic manifolding and exhaust by applying a stage one kit. Then what? Considering the ‘get more in to get more out’ theme, the main restriction - all else being equal - is the valves and their behavior. How big they are, how efficient they are and how long they’re open for determines how much gets in with each gulp each bore/piston makes. Modified cylinder heads are popularly next, although it has to be said that although a well modified cylinder head will improve performance, the gain against cost is nowhere near that given by the ‘stage one’ kit application. A good stage one kit’s improvement verses cost is around £12.50 per 1 hp, a decent modified head typically £30 per 1hp - dependent on application. Hmm.

Flywheel - Pre-Verto Types

The early spring-type clutch flywheels are of no use except where total originality is required on a concours car. The taper is too small and diaphragm pressure ring non-existent. No use to man nor beast. Part No Applications: C-AEG421, C-AEG420, C-AEG619, C-AEG620, 2A3657, 2A3658, 2A3659, 2A3512 With the exception of the fact the two-piece flywheel is two pieces bolted together - this and the later one-piece cast item can be treated as the same thing. They will universally fit all transverse engine cranks from 1964 onwards, so that should be easy enough. If all you can get is the hulking great 1300 type, then this too is as universal to fit, but I highly recommend you get that extra cast lump machined off of the outer edge as a bare minimum. Further lightening of these cast flywheels is possible by having metal machined off of the diaphragm side, from the outer edge of the diaphragm pressure ring outwards.

Modified engines producing more power generally induce owners to drive with greater verve, particularly when competing in one of the many motorsport disciplines. Terminology - LSD - Limited Slip Differential In fact this isn’t isolated to modified Minis. Owners of relatively standard machinery competing in a discipline or merely out on a country lane blast are subject to the same determination. The more verve/determination applied, the more of a struggle keeping your Mini on the designated track becomes. Generally the problem is down to grip - or more precisely the lack of it. Suspension modifications and extensive twiddling of geometry settings can provide improvements in stability, both for straight lines and turn in/mid corner performance. But even throwing bucket loads of cash at super high grade dampers, and the odd arm/leg/lung handed over to ‘professional’ chassis tuners doesn’t solve the particular grip problem we’re interested in here - corner exit/acceleration grip, or

‘Salisbury’ is the word banded about by most un-enlightened folk when discussing LSDs for Minis, mistakenly believing the word covers all Mini orientated LSDs. This is grossly incorrect. Terminology - LSD - Limited Slip Differential The ‘Salisbury’ was designed in the ‘50s at a time when racecars were a good deal less sophisticated than today. Tyres were usually cross-ply with severely limited grip due to poor compounds developed ostensibly for rear-wheel-drive cars; the front wheel drive of the Mini being a rarity. And tracks were more than a little ‘bumpy’. Agriculturally built cars needed an LSD designed along similar lines; enter the Salisbury - effectively developed from a tractor diff. High static pre-loads were more than common to help compensate for severe short-falls in chassis, suspension, and tyre design. To all intents and purposes the diff was practically locked up, making the car a real beast to drive.

Manx historic rally shakedown.

As a shakedown for this year's main event, the Manx historic rally, which is a round of the British Championship, we decided to give 277 BRX a run on the Leukaemia Rally at the end of June.

This is one of those areas where there is more than one way to skin the cat - depending on who you speak to. This is the method I have used for eternity, which has been totally reliable and never had a problem with.

This only applies to non-Verto type clutches, as the Verto types are not adjustable. You just have to make sure all the operating linkage components are in good order.

First off, ensure your operating linkage is up to scratch. For details on this, see 'Engine transplants - Clutch and flywheel'.

Satisfied all is OK, you can proceed with setting the linkage up.

1 - Remove/disconnect clutch return spring.

2 - Undo throw-out nuts (15/16"AF nuts on outer end of plunger) lock nut and back nuts off away from clutch cover.

This is to help those floundering in an unknown sea of techno-babble and 'magical' cures… Part No Applications: C-AHT288, CAM150, CAM151, TAM1617, CAM4545, 51K1193, TAM1521, GEG300, C-AHT188, C-STR1057, A regular visitor to the message board, and something I am asked frequently about in my other incarnations for other technical media. Generally when something has gone badly wrong! Many folks have just as many ways of dealing with the following subjects - all can and will claim their way has worked for them for the proverbial millennia - so a few words as a basic reference and guide as I see them; we all know there are always exceptions to the rules. This is to help those floundering in an unknown sea of techno-babble and 'magical' cures…

RUNNING IN NEW ENGINES

Install engine. It is absolutely imperative that the cooling system is more than sufficient to deal with any temperatures likely to be produced by the engine. More power means more heat to be dissipated. A standard radiator is very unlikely to be able to cope with a reasonable power increase over standard.

Do not fill cooling system yet. Set clutch throw-out and free-play take up. Double-check all connections electrical, oil, fuel and cooling system. Put in engine oil – use a cheap multi-grade mineral oil. DO NOT use either semi or full synthetic oils. They will stop the rings from bedding in. Remove spark plugs, and spin engine over in bursts of a few seconds to pick up oil pressure and prevent starter motor damage. DO NOT start engine until oil pressure picks up.

Once oil pressure is showing, check ignition timing statically. Set to figure advised by distributor maker, or if no figures available, set at around 6-8 degrees BTDC. Re-fit spark plugs a

What they don’t tell you in the manual! Terminology - FD - Final Drive (diff ratio) What they don’t tell you in the manual! If you’ve decided the FD fitted isn’t what you want, changing the FD is possible without separating the engine from the gearbox. Removing the diff case will allow you access to the diff assembly to change the crown-wheel, and access to the gear-change linkage. Use a manual for crown-wheel replacement. While you’re in there it would be just as well to replace the thrust washers and diff-pin as these are the source of many a gearbox problem. Particularly for up-rated engines where fitment for the competition diff-pin is highly recommended. Once again, follow the manual here. Now the bit they don’t tell you how to do... Rod-change types - Removal of the speedo drive housing gives access to the pinion retaining nut (1.5”AF socket needed and a long bar). To be able to undo the pinion nut (torqued up to 150lb ft !!) you need to engage two gears - 2nd and 4th - t

Contrary to popular mis-guidance, all BBUs will fit all four-syncro gearboxes. It was only the three-syncro boxes that varied in casting dimensions causing hassles where 1275s were applied to 850/998 gearbox casings.

Terminology -
BBU - Big Bore Unit (1275cc based engines)
SBU - Small Bore Unit (850/998/1098cc based units)
FD - Final Drive

NOTE: This information is largely for transplanting large-bore engine units into small-bore engined Minis. For further information on up-grading transfer (drop) gears, refer to relevant separate article.

Terminology -
BBU - Big Bore Unit (1275cc based engines)
SBU - Small Bore Unit (850/998/1098cc based units)
FD - Final Drive

Bill Sollis - Thruxton race report.

Our Brands Hatch successes were followed by a five week break and with holidays to take what better way to enjoy the first two wins of the season. Thruxton loomed up and the sense of expectation is never greater than when contemplating the mega fast Hampshire circuit. Preparations went beyond the usual full spanner check. We have acquired a cylinder leakage....

Ignition - Pertronix Ignitor issues

I have been using the Ignitor ignition systems for some 8 years or so, as long as they have available in the UK, and have never found fault with them nor had any reliability issues. Until the beginning of this year… A new customer for this year, racing an MG Midget here in UK under a limited mods category, was doing splendidly for the first couple of races, then started experiencing a misfire. Initially it was believed to be a fuel starvation/vaporization issue. All fuel pipes were checked and re-routed where it was considered necessary. Those still considered in danger of getting too warm were heat shielded. The misfire persisted. On to the ignition system. All was checked, but then a loose alternator wire was found and blamed for the fault. It wasn't. Back to the ignition system then.

Articles search results for lock set

Contact Mini Spares

Store Details:

Classic Mini Brochure & Manuals